Technical Specification of the Flush Doors used in the Finished Product

As per IS Standard for Flush Doors IS : 2202

No.
Name of Test
Required Parameters
Result
1
Dimension & Squareness of 500mm Length/Width+/-5mm,
  Thickness +/- 1mm,
  Squareness 1mm at a length of 500mm
Pass
  Pass
  Pass
2
General Flatness <6mm
<4mm
3
Local Planeness <0.5mm
<0.3mm
4
Impact Identation <0.2mm
Pass
5
Edge Loading Test Max Deflection < 5mm
  Residual Deflection < 0.5mm
  Lateral Buckling < 2mm
Pass <4mm
Pass <0.45mm
Pass <1.5mm
6 Shock Resistance Test Should withstand 5 blows
Withstand
> 10 blows
7 Misuse Test Pass
Pass with excellence
8 End Immersion Test Should have no delamination at the   end of the test
Pass - No delamination at the end of test
9 Knife/Glue Adhesion Test Pass
Excellent Adhesion
10 Screw withdrawal resistance >1000N Pass >1200N